Troubleshooting

This guide explains how to optimize connection range and maintain a stable signal when using Deeper Quest or Deeper Spark, especially at longer distances. 1. Raise Your Phone or Remote Controller For Deeper Quest, keep the Remote Controller at least 1.2 m (4 ft) above the water level. Using a tripod is strongly recommended. For Deeper SPARK, keep your smartphone at least 1.2 m (4 ft) above the water level. If you are using the optional SPARK Remote Controller, keep the remote controller at le...

In this article, you will learn how to resolve common Deeper Quest and Deeper Spark Autopilot issues, such as inaccurate navigation, drifting, or missions pausing unexpectedly. You will also learn how to properly calibrate the Autopilot system for reliable performance. Common Autopilot Issues You may experience the following problems: - The boat moves in circles or drifts off the planned route - Autopilot accuracy is poor - Missions pause or stop unexpectedly These issues are most commo...

This article explains how to resolve connection issues with Deeper Quest or Deeper Spark – whether you cannot connect to its Wi-Fi network or the Fish Deeper app does not recognize the device. Correct Connection Sequence Follow this sequence to ensure a proper connection: - Turn on the Deeper Quest boat and the Remote Controller. For Deeper Spark, turn on the Spark boat. If you are using the Spark Remote Controller, turn it on as well and make sure it is [paired with the boat.](https://suppo...

This article explains how to pair a remote controller with your Deeper bait boat in case pairing is required. The pairing process is slightly different for: - Deeper Quest - Deeper Spark Important: - Deeper Quest comes with a pre-paired remote controller included in the package - Deeper Spark remote controller is purchased separately as an accessory When Pairing Is Needed You may need to pair the controller again in the following situations: - After controller warranty service - ...

This article will guide you through troubleshooting charging issues with the Deeper Quest, Deeper Spark or their Remote Controllers. You will learn how to identify common problems and follow proper inspection and cleaning procedures. Common Charging Issues - Overview Charging problems with the remote controller are most often caused by: - Dirty or corroded charging contacts - Faulty charging cables or adapters - Improper battery placement Troubleshooting Charging Issues with the Remote ...

This article explains why your Deeper Quest or Deeper Spark sonar may not start scanning or may stop during use, and provides clear steps to restore normal operation. Common Causes - Dirty or obstructed water sensors. The most common cause. If sensors do not detect water, scanning will not start or may stop randomly. - Air bubble on sensors (first use in water). An air pocket between the sensors and water can prevent activation. - Weak or lost connection. Connection issues may pause sonar...

This article explains how to resolve lag or delayed response when using Remote Controller of the Deeper Quest or Spark. Possible Cause The most common cause of delayed or unresponsive manual control is that the controller requires calibration. Calibration resets the controller’s internal sensors and restores normal responsiveness. How to Calibrate the Controller - Turn on the controller using the main power switch. - Press and hold both A and B buttons simultaneously for 3–4 seconds. The ...