This article explains how to pair a remote controller with your Deeper bait boat in case pairing is required.
The pairing process is slightly different for:
Deeper Quest
Deeper Spark
Important:
Deeper Quest comes with a pre-paired remote controller included in the package
Deeper Spark remote controller is purchased separately as an accessory
When Pairing Is Needed
You may need to pair the controller again in the following situations:
After controller warranty service
When using a new or replacement controller
If the controller no longer connects to the boat
Pairing Deeper Quest Controller
How to Pair
Turn on the Deeper Quest bait boat using the power button.
Turn on the remote controller using its power button.
Press and hold the left and right hopper buttons simultaneously. Keep holding until the boat’s LED light starts blinking white.
Release the buttons. The pairing process is now complete.
Pairing Deeper Spark Controller
How to Pair
Turn on the Deeper Spark bait boat.
Turn on the Deeper Spark remote controller.
Press and hold the B button on the controller. Keep holding until the boat enters pairing mode and the LED starts blinking white.
Release the button. The pairing process is now complete.
Tips:
Keep the controller and bait boat close together during pairing
Ensure both devices are sufficiently charged
Avoid performing pairing near strong wireless interference sources
Important Compatibility Note
The remote controllers are model-specific:
A Deeper Quest controller will not work with a Deeper Spark
A Deeper Spark controller will not work with a Deeper Quest
Each controller can only be paired with its corresponding bait boat model.